1、Overview

CLKC series high voltage power capacitor adopts the most advanced technology design, easy to immersion in the polypropylene film as the whole film dielectric,use without PCB, high safety and e nvironmental performance of insulating oil as impregnant. High resistance box shell detonation specification, ensure use s afety. Ea ch c apacitor c omponent has a fuse protection ( fusing inside or outside the fuse protection), each capacitor have enclosed discharge resistance.

CLKC series high voltage electric power capacitor is used to improve th e power factor, re duce line loss,improve th e e fficiency o f tra nsformer, i mprove the quality of power supply, reduce the power distribution cable section, to improve the power transmission capacity, achieve the goal of energy conservation and emissions reduction.

2、the main advantages

●internal components adopts full film dielectric,

●capacitor dielectric loss is extremely low

●Low failure rate, capacitor

●Light weight,

●insulating oil non-toxic pollution-free conform to the

requirements of environmental protection

●built-in discharge resistance, fast discharge to safe range

●wide application environment temperature

●capacitor capacity value deviation is small

●long service life

●safety performance is high

3、the structure characteristics of the structure

Special gases in the insulating oil

Medium and impregnant trace moisture is one of the important problems affecting discharge performance of capacitance, the technology can further remove the trace water in the oil medium; Improve the partial discharge performance and electrical resistance; Better to the movement of impregnant and good forheat dissipation; Ease impregnant medium weight and reduce the overall weight; Has better reliability and longer service life.

A convex plate design

The structure of capacitor unit adopts the design of protruding electrode plate to basically eliminate the resistance loss, enhance the ability o f instantaneous current. Interelectrode dielectric as easily impregnated surface coarsening polypropylene membrane, greatly improve the reliability of high-capacity capacitor.

Aluminum foil folding structure

Both the ratio of the field intensity from 6 times down to 2 times, so that by eliminating the plate edge burr to eliminate the high field strength, can design is higher than general capacitor electric field strength, reduces the loss of capacitor, to reduce the risk of partial discharge the capacitor, the capacitor insulation reliability. Can be enhanced more.

4、technical parameters
Ratedvoltage:6~35kv,50hz/60hz(other customizable)
Over voltage range: 1.1 Un long, 1.15 the Un 30 minutes, 1.3 the Un for 5 minutes, 3 Un for 1 minute
Dielectric loss: 0.2 W/kvar or less
Over current capacity: 1.5 In long run (higher can also be customized)
Insulation class: 3 kv / 40 kv, 6 kv / 60 kv, 10 kv / 75 kv,20 kv / 125 kv
Electrode pressure: 2.15 the Un under ac voltage 10 seconds
Medium structure: high quality polypropylene film, and environmentally friendly insulating oil Safety  protection :fuse inside or outside fuseprotection
Discharge protection: built-in discharge device, < 75v / 10 min or < 50 v / 5 min (custom) or higher
Temperature rating: - 40 ℃ ~ + 50 ℃ (or higher)
Cooling method: natural cooling, ventilation cooling) can be used inside ark
The loss tangent value: 0.0002 or less
Capacitance tolerance: 5% ~ + 5%
Technical standards:IEC60871/EN60871 ,GB/T11024, VDE0560, etc

5、pecifications

System voltage 10 kv, frequency 50 hz

Model	Capacity	Tonerance	Voltage	Size(mm)L/B/H
CLKC50-10KV	50	-5%~+5%	10	383 140 485
CLKC100-10KV	100	-5%~+5%	10	383 140 595
CLKC150-10KV	150	-5%~+5%	10	383 140 735
CLKC200-10KV	200	-5%~+5%	10	383 140 810
CLKC250-10KV	250	-5%~+5%	10	383 180 805
CLKC300-10KV	300	-5%~+5%	10	383 180 890
CLKC400-10KV	400	-5%~+5%	10	383 180 1060
CLKC500-10KV	500	-5%~+5%	10	383 195 1165
CLKC600-10KV	600	-5%~+5%	10	383 195 1330