1、Overview

high pressure filter reactor suitable for 6 to 35 kv power s ystem, r eactive po wer c ompensation and harmonic control is the main form a complete set of equipment, it and shunt capacitor of LC circuits, to restrain power grid voltage waveform distortion, inhibition th rough th e ca pacitor se t of h armonic component and flow limit switch capacitor groups.High pressure filter reactor has become the indis pens able equipment of reactive power compensation device. Industry is i n the power grid construction, high pressure filter reactor as important reactive power compensation equipment widely used, its usage is also increasing.

2、the structure characteristics of

(1) high pressure filter reactor core is made of high quality cold rolled silicon steel sheet, low loss by high laminated neat and beautiful, to ensure the high pressure fi lter re actor te mperature ri se l ow n oise characteristics at runtime.

(2) high pressure filter reactor coil is epoxy pouring model, U SES the c lass H un der va cuum po uring epoxy pouring system,the epoxy pouring coil insulation performance is good, and good mechanical strength, can endure large current shock and cold and hot shock not crack. Meanwhile epoxy pouring coil not bibulous, l ow pa rtial di scharge, c an ru n u nder th e condition of bad environment security.

(3) the cylindrical structure is used in high pressure filter reactor coil heat dissipation area is large, the cooling efficiency high.

(4) the coil ends up and down using epoxy block and Silicone rubber cushion,scientific design and reasonable structure, the effective damping measures, effectively reduce the vibration of the runtime wire coil,make product noise to a minimum.

(5) high pressure filter reactor coil surface is bright and clean, the overall appearance is good.

3、technical parameters

Rated voltage: 6 ~ 35 kv

Manufacturing methods: three-phase, iron core, with the air gap

Electric resistance rate: 6%, 12% (other) are available

Design parameters: Uh1 = 106%, Uh3 = 0.5%, Uh5 =Uh7 = 5%

Level of temperature: T40 / B

Parameter accuracy: 3%... 3%

Protection grade: IP00, indoor installation

Cooling way: since the cold air

Insulation class: class H

Linear degrees: 1.8 In

A power flow: 1.8 In

Execution standard: VDE0523 IEC76

4、specifications

10 kv three-phase core reactor

Commodity	Reactance coefficient	Rated capacity (Kvar)	Shunt Capacitor Capacity (Kvar)	Response disparitu	Dimensions (mm)			Mounting dimensions
					Long	Width	High	Long	Width	Aperture
CLKD1200-6-10KV	6%	72	1200	±3%	1080	460	960	560	360	14
CLKD1500-6-10KV	6%	90	1500	±3%	1080	460	1090	560	360	14
CLKD1800-6-10KV	6%	108	1800	±3%	1080	480	1100	580	380	16
CLKD2400-6-10KV	6%	144	2400	±3%	1110	500	1120	600	400	16
CLKD2700-6-10KV	6%	162	2700	±3%	1110	520	1180	620	420	16
CLKD3000-6-10KV	6%	180	3000	±3%	1140	520	1160	620	420	16
CLKD3300-6-10KV	6%	198	3300	±3%	1200	520	1205	620	420	16
CLKD3600-6-10KV	6%	216	3600	±3%	1200	560	1250	660	460	16
CLKD4000-6-10KV	6%	240	4000	±3%	1200	580	1260	660	480	16
CLKD4200-6-10KV	6%	252	4200	±3%	1200	560	1235	660	460	16
CLKD4500-6-10KV	6%	270	4500	±3%	1260	600	1290	700	500	16
CLKD5000-6-10KV	6%	300	5000	±3%	1260	600	1380	700	500	16